Dorrough 40-A Specifications download pdf (Page 22)

Set Up StarFish, Timecode

and Phase Meter

Touching anywhere in the StarFish area will open up the StarFish and Timecode menu

including: Compressor, OP-mode and Timecode.

Compressor

The compressor section allows for different performance parameters to be set up.

Fast / Slow parameters controls the Phase correlation responds time. In particular,

when reviewing phase relation of low frequency content, the ‘slow’ position might come

in handy.

The Gain On/Off parameter allows the Goniometer and StarFish™/JellyFish™ to always

in a relevant size, but adding gain to increase the visual appearance of each of the

instruments.

The gain is evenly distributed meaning that the channel relationship is kept complete

and can always be trusted to give a correct representation.

OP-Mode

The operating mode allows you to choose between running the StarFish™ or JellyFish™.

Please refer to the instrument section for further information on each of the two.

Selecting Phase Correlation Sources

The PAM PICO TOUCH allows you to freely define what two channels phase

relationship is expressed by the Phase correlation meter.

In order to change the Phase sources, slide to the top set of vertical buttons and hit

the ‘PHSE SRC’ button and the horizontal row of buttons turns into Phase correlation

source selection of the first 8 incoming channels.

In case you need to select sources from ch.9-16, you will need to enable the

‘PHSE SRC+’ function.

Press and hold an empty on screen button for about 3 seconds and then select

‘PHSE SRC+’ from the list. Now you have access to selecting ch. 9-16 as sources for

the Phase correlation meter as well.

Exiting the ‘Source list’ mode can easily be done by hitting one the standard button

sets [Loudness], [Preset] or [Main].

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 42 43

No comments

Dorrough 40-A Specifications Page 22